Produktinfos

 

Sharp Universal Single LNB BS1K1EL100A

Sharp Universal Single LNB BS1K1EL100ASingle LNB mit hochdichter Versiegelung und Spritzwasserschutz für eine lange Lebensdauer.
 
Art.Nr.:11028

 

 

sharp-bs1k1el-serie-medium.jpg

 

Mit Wetterschutz

 

Technische Daten

General Specifications
Input component Feedhorn
Receiving frequency rage
10.7 - 11.7 GHz (Low Band)
11.7 - 12,75 GHz (High Band)
Local oscillation frequency
9.75 GHz (Low Band)
10.60 GHz (High Band)
Output frequency
950 - 1950 MHz (Low Band)
1100 - 2150 MHz (High Band)
Output component F-type female connector (with water-proof)
Nominal output impedance 75 Ohm
Supply voltage and control signals
11.5 - 19 V
continous 22 KHz (± 4 KHz)
Power supply system IF output overlapping system
Weight 90 ± 25 g

 

 

 

 

 

 

 

 

 

 

 

Ambient Conditions
Operating temperature -20°C - +60°C
Storage temperature -20°C - +60°C
Humidity 5 % - 95 % RH
Ambient pressure 1010 ± 150 hPa

 

 
 
 
 
 
 
 
 
Achtung:
Beim F-Stecker, der aufgedreht wird, muss auf die korrekte Abisolierung des Kabels geachtet werden. Hierbei sollte der Innenleiter nicht dünner als 0,8 mm (2) und die Abisolierlänge nicht mehr als 5 - 9 mm (1) betragen.
 
 
skizze_abisolierung.jpg
 
Electrical Characteristics
Item Specification Condition
Operating Frequency Band
Input Frequency
min. 10.70 GHz, max. 11.70 GHz
min. 11.70 GHz, max. 12.75 GHz
Low-Band
High-Band
Output Frequency
min. 950 MHz, max. 1950 MHz
min. 1100 MHz, max. 2150 MHz
Low-Band
High-Band
Conversation gain typ. 58 dB Center Freq. at Each Band
Gain Frequency
Characteristics
typ. 7.0 dBpp
typ. 7.0 dBpp
typ. 1.0 dBpp
Low-Band
High-Band
Within any 26 MHz segment
L.O. Frequency and drift
L.O. Frequency
typ. 9.75 GHz
typ. 10.60 GHz
Low-Band
High-Band
Drift associated with Temperature change
typ. ± 3 MHz at -20°C - + 60°C
L.O. Phase Noise
typ. -55 dBc / Hz
typ. -80 dBc / Hz
typ. -100 dBc / Hz
at 1 KHz Offset at High-Band
at 10 KHz Offset at High-Band
at 100 KHz Offset at High-Band
1 dB output gain typ. 0 dBm
Cross-Polar Discrimination typ. 25 dB
Supply Voltage
min. 11.5 V, max. 14.0 V
min. 16.0 V, max. 19.0 V
Ca: Vertical Polarization
Cb: Horizontal Polarization
High-Band selection*
Switching Range
min. 18.0 KHz, typ. 22.0 KHz, max. 26.0 KHz
min. 400 mVpp, typ. 600 mVpp, max. 800 mVpp
min. 11.5 V, max. 19.0 V
Rectangular pulse Frequency
Rectangular pulse Amplitude
DC Offset
False Triggering of Pulse
(Low-Band selection
Switching Range)
max. 100 KHz
max. 50 mVpp
min. 11.5 V, max. 19.0 V
Any Pulse Frequency
Any Pulse Amplitude
DC Offset
Current Consumption typ. 95 mA, max. 120 mA
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
Wichtiger Hinweis:
 
* Control Signal Characteristics
 
High-Band selection Low-Band selection
Frequency: 18 KHz </= fo </= 26 KHz DC </= fo </= 100 KHz
Amplitude: 400 mV(pp) </= Amplitude </= 800 mV(pp) < 50 mV(pp)
DC Offset: 11.5 V </= DC Offset </= 19.0 V 11.5 V </= DC Offset </= 19.0 V
 
 
skizze_control_signal.jpg